Work performed by Certified Service Technicians
Pool Opening
- Remove pool cover
- Install gauges, plugs, directional returns & baskets
- Cleaning and evaluation of pool heaters performance
- Assemble automatic cleaner
- Install ladders & rails
- Perform basic on-site water testing
- Brush tile line and pool walls
- Remove winterizing plugs
- Blow leaves and debris from pool/spa deck area
- Blow/clean pool equipment area from leaves as needed
- Provide and add initial chlorine shock treatment
- Start-up circulation system "pool must be full". (half way of the skimmer line)
- Programing of any animation systems related to pool equipment
(Pentair intellitouch, Easytouch, Iaqualink control)
- Visual evaluation of the pool
Need maintenance done to your pool?
Pool Closing
- Lower water level as required by pool cover manufacturer recommendation
- Remove filter (grids/cartridge) hose off residuals and dirt as well as backwash sand filters
- Remove water from underground pipes and apply antifreeze as needed
- Remove drain plugs
- Winterize filtration equipment, heater, cleaner, floor cleaner systems(caretakers and paramount systems)
- Install customer’s freezing plugs
- Remove and store ladders, rails, and automatic pool cleaner as requested by customers
- Provide and add winter chemicals
- Cover pool using customer’s pool cover
- Provide customers with inspection of future maintenance or repair
Need a new pool cover?
We work with the most modern and strongest covers in the industry.
Winter service
- Blow off leaves around pool deck area
- Remove water and leaves from pool cover
- Provide and add off-season algaecide and chlorine treatments to pools with mesh cover (Based on condition of the pool additional chemicals required will be added by customers approval)
- Provide additional vacuuming to remove leaves and sediments inside the pool and spa.
- Inspect and test pool pump(motors, heaters and general pool equipment)
- Inspect and replace water tubes and cover springs as required (additional cost by customer approval)
- Adjust cover and/or spring tension
- Patch pool cover by customer requests (Holes no bigger than 4in.)
- Provide digital water analysis on pool and balance accordingly
- Lower water level as required by covers manufacturer recommendations
- General site inspection and notify customer of any potential issues
*30 minutes allotted for each visit. If excessive cleanup is required (Weather conditions, party clean up, etc.) additional rates may apply.
Weekly and Bi-weekly service
Weekly and Bi-weekly service
Weekly and Bi-weekly service
- Clean deck area
- Vacuum, sweep and skim pool and spa as needed
- Clean pumps and skimmer baskets as well as Leaf trapper bags related to any floor cleaning systems
- Backwash and clean filters
Based on weather conditions customers with salt generator systems may be required to have additional salt available in case it's needed on site.
Weekly and Bi-weekly service
Weekly and Bi-weekly service
- Inspect pool equipment (Heaters and controls)
- Provide customers with a written review on maintenance performed by service tech
- Test & Balance pool with chemicals provided by customer or Xiloa.
(Chemicals Provided by Xiloa upon customers request)
Vacation Service
So you have an exciting vacation planned; whether you are going away for a few days or weeks and you've taken care of everything please don't forget about about the personal paradise you have in your back yard.
Whatever your plans may be, one fact is certain. You won’t be home to handle pool maintenance during the time you are away.
Pool algae infestations, cloudy water, bacteria growth, Excess debris into the pool, you get it the list goes on. So please give us a call and while you have an enjoyable time we'll take care of the paradise at home.
*30 minutes allotted for each visit. If excessive cleanup is required (Weather conditions, party clean up, etc.) additional rates may apply.
- Clean pool deck and equipment area
- Empty skimmer and pump baskets
- Backwash and clean filters
- Test pool water and add your chemicals
- Sweep the pool and spa floor
- Scoop leaves out
- Vacuuming pool and spa
- Inspect pool equipment (Heaters and controls)
- Inspect for potential leaks and repair by customer approval
Find out more about scheduled services
Draining and cleaning
An acid wash becomes necessary if the pool has turned into a black lagoon. This may occur if the winterizing process is not done the right way or if the pool has been sitting without use for a long period of time in which case algae and bacteria has taken over.
Wear and Tear
Sometimes, it’s not stains, algae, or stagnation that need an acid wash. It may just be that the plaster is discolored or faded from years of chemicals and being exposed to then sun. In those cases, an acid wash will improve the appearance of your pool, and bring back the clear look it started with.
Stains
Chlorine, minerals, and dirt will leave stains over time. If you get to the point where brushing and vacuuming aren’t working anymore, it might be time for an acid wash.
Algae
If you’ve ever had an algae problem, that might’ve left some staining. If you encounter repeated algae blooms, you might not be getting all the spore-bearing bacteria with regular maintenance.
Stagnation
If your pool has sat stagnant for a while, allowing algae and dirt to really set in, only an acid wash will bring the pool back to life. If you don’t properly winterize your pool it could affect the appearance of the plaster.